Oracle Sun Fire X4800 User Manual

Workaround 2 Using Oracle ILOM CLI
Properties:
type = Network Express Module
ipmi_name = NEM0
fru_manufacturer = VENDOR_Name
fru_part_number = 511-1056-04
fru_extra_1 = FW 5.3.1.0
fault_state = OK
load_uri = (none)
clear_fault_action = (none)
power_state = On
Commands:
cd
load
reset
set
show
start
stop
5.
Use the load_uri command to upload and install the firmware update package.
The following table shows the required parameters.
Transfer Method Examples
TFTP
load_uri=tftp://ip_address/rom_nem.pkg
FTP
load_uri=ftp://username:password@ip_address/rom_nem.pkg
SCP
load_uri=scp://username:password@ip_address/rom_nem.pkg
HTTP
load_uri=http://username:password@ip_address/rom_nem.pkg
HTTPS
load_uri=https://username:password@ip_address/rom_nem.pkg
SFTP
load_uri=sftp://username:password@ip_address/rom_nem.pkg
Where:
■
ip_address is the IP address of the system where the file is stored.
■
username is the login user name to the system where the file is stored.
■
password is the login password to the system where the file is stored.
■
rom_nem.pkg is the name of the firmware update package.
6.
Wait a few moments for Oracle ILOM to confirm the completion of the firmware
update process.
A success or failure status appears.
80 Sun Fire X4800 Server Product Notes • July 2017

Oracle Sun Fire X4800 Specifications

General

Brand	Oracle
Model	Sun Fire X4800
Category	Server
Language	English