Manual for Tire Pressure Monitoring Systems, TPMS
8/20
Choosing preferred Pressure Units and Temperature Units
Step Operation process Photograph
1
By pressing the function key , it will switch among
displaying the pressure unit, displaying the temperature
unit, displaying the battery voltage, and displaying both
pressure unit and temperature unit by turns. The operator
can choose which one to set up first.
2
If the pressure unit is chosen. Press the function key
for 3 seconds, it will switch to kPa, psi, bar in turn. Once
the preferred unit is chosen release the function key
3
If the temperature unit is chosen. Press the function key
for 3 seconds, it will switch to
℃
and
℉
in turn. Once
the preferred unit is chosen release the function key
To Next Page
Loading...