TECHNICAL MANUAL BLUE PAPER LAUFEY 20206 | ORBEA ORBEA | 7
TECHNICAL SPECIFICATIONS
FRAME MATERIAL ALUMINIO SERIES 6000
TRIPLE BUTTED
INTENDED USE TRAIL, ALL MOUNTAIN
SIZES S,M,L,XL
FORK TRAVEL 140MM (150MM OPTION)
WHEEL SIZE 29” Y 27.5” (ALL SIZES)
MAX. TYRE SIZE 29X2.6, 27,5X3.0
FORK OFFSET 44mm (en 140mm y 150mm)
BOTTOM BRACKET BSA 73MM THREADED
HEADSET INTEGRATED 1 1/8-1,5
REAR AXLE STANDARD BOOST 148X12
REAR AXLE MEASUREMENTS 12X179
REAR AXLE THREAD PITCH 1.25mm
SEATPOST DIAMETER 31.6mm
SEATCLAMP DIAMETER 35mm
SEATPOST MAX. INSERTION S: 290MM / M: 250MM / L : 290MM / XL: 310MM
FRONT DERAILLEUR N/A. SÓLO 1X
CHAINRING MAX SIZE 34T ROUND
CHAINRING MIN SIZE 30T
BRAKES DISCO POST MOUNT *
MIN SIZE REAR ROTOR
180mm
MAX SIZE REAR ROTOR 180mm
CHAINGUIDE ISCG05
CABLING INTERNAL IN DOWNTUBE (FULL SLEEVE)
LEFT-ROAD CABLING READY YES
BOTTLE HOLDER 1 IN SIZE S
2 IN SIZES M, L, XL
DI2 COMPATIBLE NO
DRIVETRAIN COMPATIBILITY 11 AND 12 SPEED
POWERMETER COMPATIBILITY CONSULT POWERMETER MANUFACTURER SPECIFICATIONS
* Not all calipers and rotors in the market are compatible with all frames.
All componets specicated from Orbea have been tested. For aftermarket options, check componentes dimensions and
tolerances befores purchasing.
To Next Page
Loading...
Need help?
General
