It is possible to adjust the strength of the spring according to the weight of the user. If the suspention
adjusting bolt is turned clockwise, the spring is tensioned. If the suspention adjusting bolt is turned
unclockwise, the spring is loosened.
SAFETY SWITCHES
All machines are equipped with safety switches :
• To start engine when cutting blade lever is disengaged. If the brake pedal is disengaged, the
machine can’t be worked.
• When the operator leave the seat while the engine is running, the engine is cut off.
• The operator can’t leave the seat if the blade are engaged even if the parking brake is engaged.
WARNING
Never start the engine when operator is not seated in operator’s seat. Do not dismount, cut off,
unplug or change the safety switches. If the engine is cut off by a safety switch, put the key in
"stop" position to avoid unloading of the battery
FUEL COCK(FIG. 9)
The machine is equipped with a fuel cock. This fuel cock is opened when the lever is in the same
direction as the fuel hose.
The fuel cock is closed when it is turned across the fuel hose.
To Next Page
Loading...
