OREC RABBIT RM882 - Ec Conformity Declaration; Measurement of Vibrations

OREC RM881 - © SAT 2021-05-06
28
EC CONFORMITY DECLARATION
Business name and full address of the manufacturer:
OREC CO LTD 548-22
HIYOSHI HIROKAWA-MACHI
YAME-GUN FUKUOKA JAPAN
S.A.T. sarl - Force 7 – ZA
- 38110 ROCHETOIRIN France
owner of the technical documents
Designation : brush cutter
Mark : OREC
Type : RM982F
Serial Identification :
Engine :
- Manufacturer : Kawasaki Briggs
- type : FS691V Vanguard 627cc
- Power : 17,2kW 17,0kW
Width of cut : 975mm
Conforms to directives: 2000/14/EC, 2006/42/EC, 2014/30/UE
Conformity assesment : 2006/42/EC Annex VIII
Measured acoustic power level : 101,73 dB(A)(Kawasaki) / 101,16dB(A)(Briggs)
Granted acoustic power level : 102 dB(A)(Kawasaki) / 102 dB(A)(Briggs)
Conformity assesment : 2000/14/EC Annex V
Acoustic pressure level at operator’s ears : 88,4 dB(A)(Kawasaki) / 87,5 dB(A)(Briggs)
Harmonized standards used : EN 12733-2009, EN 12100-2010
EN ISO 14982-2009,
EN ISO 3744-2010, EN ISO 3746-2010,
EN1032-2003+A1-2008, EN ISO 20643-2008
made at : Fukuoka, 24 February 2017
Signed : Haruhiko Imamura
Function : Managing director
MEASUREMENT OF VIBRATIONS
Mark : OREC Type : RM982F Seat : COBO
Kawasaki FS691V
Briggs Vanguard 627cc
Pick up location
Awp
Awp
Right side 60° from the axle of the steering wheel
0,65 m/s²
1,63 m/s²
Left 60° from the axle of the steering wheel
0,61 m/s²
1,63 m/s²
On the operator's seat
0,80 m/s²
0,95 m/s²