OREC RABBIT RM882 - Ec Conformity Declaration; Measurement of Vibrations

OREC RM881 - © SAT 2021-05-06
26
EC CONFORMITY DECLARATION
Business name and full address of the manufacturer:
OREC CO LTD 548-22
HIYOSHI HIROKAWA-MACHI
YAME-GUN FUKUOKA JAPAN
S.A.T. sarl - Force 7 – ZA
- 38110 ROCHETOIRIN France
owner of the technical documents
Designation : brush cutter
Mark : OREC
Type : RM882
Serial Identification :
Engine :
- Manufacturer : Kawasaki Briggs
- type : FS481V Vanguard 479cc
- Power : 10,8kW 11.7kW
Width of cut : 880mm
Conforms to directives: 2000/14/EC, 2006/42/EC, 2014/30/UE
Conformity assesment : 2006/42/EC Annex VIII
Measured acoustic power level : 103,85 dB(A)(Kawasaki) / 100,13 dB(A)(Briggs)
Granted acoustic power level : 104 dB(A)(Kawasaki) / 101 dB(Briggs)
Conformity assesment : 2000/14/EC Annex V
Acoustic pressure level at operator’s ears : 79,9 dB(A)(Kawasaki) / 87dB(A)(Briggs)
Harmonized standards used : EN 12733-2009, EN 12100-2010
EN ISO 14982-2009,
EN ISO 3744-2010, EN ISO 3746-2010,
EN1032-2003+A1-2008, EN ISO 20643-2008
made at : Fukuoka, 24 February 2017
Signed : Haruhiko Imamura
Function : Managing director
MEASUREMENT OF VIBRATIONS
Mark : OREC Type : RM882 Seat : COBO
Engine
Kawasaki FS481V
Briggs Vanguard 479cc
Pick up location
Awp
Awp
Right side 60° from the axle of the steering wheel
0,32 m/s²
1,67 m/s²
Left 60° from the axle of the steering wheel
0,68 m/s²
1,70 m/s²
On the operator's seat
0,99 m/s²
1,00 m/s²