CHECK LIST
INSTRUCTIONS TO THE DEALER
The assembling, the installation and the first application of the machine is under the OREC dealer’s
responsability.
Read the instruction manual as safety measures. Check that all contents before delivery and at
delivery check points specified in the following lists have been verified and possibly modified before
delivering the machine to its owner.
CHECKS BEFORE DELIVERY
• Check that all the shields, grids and safety guards are in place and in a good state.
• Check that the hydraulic hoses are in place and good condition. Replace them if necessary.
• Check that there is no oil leak, repair if necessary.
• Check that the safety instruction stickers are in correct place and in a good state. Replace them if
necessary.
• Check that all the bolts and screws are properly tightened with the right torque (refer to chart).
• Protect the grease nipples by coating them with grease and lubricate the machine.
• Check that the machine can work properly : check blade engagement and disengagement, check
that the safety switches works properly.
CHECKS ON DELIVERY
• Show the user how to perform the adjustments.
• Explain to the user the importance of the lubrication and show him the different greasing points on
the machine.
• Show the user how to use the safety devices, shields, guards and the optional equipments.
• Give the instruction manual to the customer, and ask him to read this manual carefully.
• Explain to the customer that drive on the public roads is forbidden.
SAFETY RULES
CAUTION
Some of the illustrations show the machine with no guard, no shield. Never use the machine
without these devices.
• Learn to stop the machine in emergency case.
• Read and understand all the safety instructions of this manual.
• Do not let anybody use the machine before read and understood this manual.
• Do not use the machine near bystanders. They can be hit by thrown objects
• Do not let children use the machine.
• Do not wear loose clothes. They might be
grasped by moving parts.
• Always wear protection equipments when using
the machine.
• Only work during daylight or with a good artificial light.
• Check that the safety instruction stickers are in place and in a good
state.
• Keep the machine free from debris or mud.
To Next Page
Loading...
