Steering (Figure 18)
Check for vertical gap which must not exceed 1 mm.
Check for lateral gap which must not exceed 40 mm by
turning steering wheel.
If the operator doesn’t know the distance of the gap, ask
your dealer to repair the machine.
TIRES (Figure 19)
⚫ Check that tires are not cut, cracked or worn.
⚫ Check for tires pressure: 1, 2 bar front and 1,4 bar rear.
Safety stickers
⚫ Check that safety stickers are sticked at correct position. Replace them if they are worn and
damaged.
Latelal guards and shields
Check that lateral guards and shields are fixed.
Electrolyte battery level (Figure 20)
Check that electrolyte level is between the upper and lower
level. Add distilled water if necessary.
To Next Page
Loading...
