7. 点検表
- 26 -
4.2 Driving, Speed change, Turning and Stopping
Do not use by unskilled people (people other than the owner) in safe work and operation
methods.
When you drive for the first time, check the safety of your surroundings and practice at a
low speed on a flat surface without obstacles until you are familiar with the operation
and features of the product. If you drive at a high speed suddenly, it may be
confusing to operate when it is emergency case.
4.2.1 How to drive
① Start the engine。
〈4.1.1Refer to How to start the engine〉
② Move the throttle lever to the "high speed" side to
increase the engine speed.
③ Depress the parking brake pedal deeply to release the
brake stopper. Never operate the change pedal (shift
lever) while the parking brake pedal is "locked". This will
force the braked wheels to be driven, resulting in
overloading of the brakes and the transmission, which
can cause damage.
④ Slowly tilt (depress) the speed change lever (change
pedal) forward to move the machine forward.
Reference
︔
The Driving speed changes steplessly depending on the angle at which the speed change
lever (change pedal) is tilted. Release the change pedal to return to neutral N. For the
safety Start slowly .
Throttle lever
Release
Brake stopper
Parking brake pedal
warning
To Next Page
Loading...
