• Push slowly cutting blade control lever (2 Figure 7 in engage position and pull up the lever (3) ,
then go forward in the grass to mow.
• The best cutting speed depends of quantity and the density of the grass. Usually it is asked to
mow between 2,5 and 6 Km/H. A tall grass will be cut slowly and a low grass will be cut faster.
WARNING
Do not forget that it is better to mow a few grass often than an important quantity in one
operation. Short grass do not resist to dry weather, and the blade can hit the grown with
damage and trhown objects.
How to stop the machine
• Release travel speed lever and blade clutch lever.
• Pull backward the throttle lever to stop.
• Close the fuel cock
WARNING
Never park the machine on slopes. Stop it on a level and flat surface.
Storing the machine
Thoroughly clean the machine. Use touch up paint to prevent rust. Check for worn and damage parts,
install new parts as required. Preform the normal maintenance of the machine according to
maintenance chart. Store the machine in a dry protected area. Remove sparking ignition wire from the
sparking plug.
To Next Page
Loading...
