Oreck AirInstinct AIR75B - Replacing Air Filters

11
Replacing the Filters
IMPORTANT: A lways remove the protective plastic
packaging from the lter before installing the lter.
1 Unplug the air purier.
2. Open the cover by gently pulling from the bottom corners.
3 Press the two hooks above the pre-lter, pull straight out
of the cabinet. Remove the used odor lter and HEPA
lter. Thoroughly rinse the pre-lter and let it air dry
before placing it back in the cabinet. Note: Do not
use heated or compressed air as part of the drying
process.
4 Remove the plastic bag from the lters.
5 Place the lters back in the cabinet in the following
order: HEPA lter, odor lter, and pre-lter.
Note: Insert odor filter into the pre-filter
frame before inserting into the unit.
6 Replace the cover by connecting at the top and securing
at the bottom.
2
4 5 6
3