12
Filter Reset Mode
1 When the indicator light comes on, the odor, Hepa or
both indicator lights will illuminate; indicating which
lter needs to be replaced.
2 After installing a new or replacement lter, press and hold
the reset button for approximately two seconds.
Forced Reset Mode
If you have replaced a lter before the lter replacement
light is illuminated:
1 Press and hold the reset button for 2 seconds.
2 Push the reset button to select the desired lter to forcibly
reset. Push once for odor lter and twice for the Hepa
lter.
3 To complete forced reset, press and hold the reset button
for approximately 2 seconds.
If 10 seconds have passed in the forced reset mode, the
forced reset mode is cancelled.
*
Filter life will vary by usage and environment.
2
1
1
To Next Page
Loading...
Need help?
General
