Oreck AirInstinct AIR75B - Adjusting Air Sensor Sensitivity

14
Adjusting the Air Sensor
The purier is shipped with the Air Sensor set to standard
sensitivity. Adjust the sensitivity of the sensor if you want
the air purier to adjust its fan setting in Auto Mode to more
or less frequently.
To adjust the sensitivity of Air Sensor:
1 Turn the power On.
2 Press and hold the Auto/Speed button for two seconds.
3 The speed indicator blinks according to the current
sensitivity of the air sensor.
4 Press the Auto/Speed button for the desired sensitivity.
5 Press and hold the Auto/Speed button for two seconds to
set the sensor.
Note: If ten seconds have passed while in the setting
mode the new setting will automatically be set.
Low Medium High
Sensitive Standard Insensitive
1
2
3
4