To Next PageTo Next PageWhat to do if Oregon Scientific FT101 Thermometer shows error message?
If your Oregon Scientific Thermometer displays an error message, it could be due to incorrectly inserted batteries. Ensure the batteries are correctly inserted. Alternatively, the sensor probe might be dirty or improperly used. Clean the sensor probe, wait a few minutes, and then try again.
Why is the date/time incorrect on my Oregon Scientific FT101?
If the date and time are incorrect on your Oregon Scientific Thermometer, it's likely that the date and time were not set or reset after installing new batteries. To resolve this, you should set the date and time.
Why is my Oregon Scientific FT101 Thermometer measurement inaccurate?
If your Oregon Scientific Thermometer is providing inaccurate measurements, several factors could be at play. The thermometer might be malfunctioning, in which case you should contact the retailer or customer service department. It could also be overheated; try turning it off, waiting a few minutes, and then trying again. Ensure the thermometer has adjusted to the room temperature by turning it off and waiting 20 minutes, bringing the person to be measured into the room 5 minutes prior. Also, make sure the sensor probe was applied to the forehead before starting the measurement; wait a few minutes and try again with the sensor applied before pressing the button.
How to fix no power on Oregon Scientific FT101 Thermometer?
If your Oregon Scientific Thermometer has no power, the batteries are likely exhausted. Replace them with new batteries to resolve this issue.
What to do if no records in memory on Oregon Scientific FT101 Thermometer?
If there are no records in the memory of your Oregon Scientific Thermometer, it's possible that the memory has been reset. To ensure readings are stored, take a measurement and then press the MEM button to save it to the memory.
General| Brand | Oregon Scientific |
|---|---|
| Model | FT101 |
| Category | Thermometer |
| Language | English |
Diagram showing thermometer's front and side view with component labels.
Illustration of the protective carrying case for the thermometer.
Key safety guidelines for product use, covering general warnings, heat sources, and battery handling.
Guidelines for proper cleaning, storage, and usage to ensure optimal performance and longevity.
Explains the infrared sensor mechanism and proprietary software for accurate temperature measurement.
Instructions for unpacking the thermometer and retaining packing materials for future needs.
Details on battery type, installation, replacement, and conservation for optimal thermometer function.
Simple instructions for powering the thermometer on and off using the designated power button.
Guide to setting the device's clock, date, and preferred temperature units (Fahrenheit/Celsius).
Best practices and guidelines to ensure accurate and reliable temperature measurements with the device.
Instructions on accessing and viewing previously stored temperature readings in the device's memory.
Procedure to clear all stored temperature records from the thermometer's memory.
