GB
In the box, you will find:
Batteries
This product requires two (2) 3-volt CR2032 batteries to operate.
The unit is shipped with a pair of batteries already installed. To
conserve battery life during shipment, a clear plastic tab is inserted
between the batteries and the connection terminal: You will need
to remove the tab before you use the thermometer.
CR2032 batteries generally have a long battery life (1 or more
years), but need to be replaced whenever the low battery indicator
( ) shows on the LCD display. It is recommended that you take
the unit to the retailer whenever you need to exchange the batteries.
To change the batteries:
1. Remove the battery compartment door located on the back of
the sensor probe.
2. With a small Phillips screwdriver, remove the two screws that
hold the metal bracket in place. Set the screws and bracket aside.
Forehead Protective 2x CR2032 User manual
thermometer, carrying case batteries
(packed in
battery
compartment)
7
lid,and 10
sensor
covers
To Next Page
Loading...
