GB
3. Remove the old batteries. The batteries are stacked one on top
of the other in the battery compartment.
4. Gently slide in the new batteries with the positive (+) polarity
facing up.
5. Replace the metal bracket and screws.
6. Tighten the screws with a Phillips screwdriver until they are
secure.
7. Replace the battery compartment door, and gently close it.
Note: Batteries can be harmful to the environment. Contact
your local waste disposal authority for proper disposal
instructions.
Turning the thermometer off and on
Press to turn the thermometer off and on.
Setting the calendar clock and measurement unit
The forehead thermometer includes a 50-year auto-calendar and
optional measurement units in Fahrenheit or Celsius degrees.
These settings are used to maintain a record of the last 10
temperature readings taken, and only need to be set the first time
you use the thermometer, and whenever you replace the batteries.
To set the calendar clock and measurement unit:
1. Press to turn on the thermometer.
2. Press mode until “12hr” flashes on the display.
3. (Optional) Press to switch between “12hr” and “24hr” time
display.
4. Press mode until the hour flashes on the display.
5. Repeat Steps 3 – 4 to change the hour, minute, year, display
format (M/D or D/M), month, date, and unit of measurement.
6. When you are finished, press mode to accept the changes.
8
To Next Page
Loading...
