Oregon Scientific ThermoDECT - Customizing Telephone Settings; Dial Mode and Ring Tones

12
EN
8. Press when you are finished to display the entry exactly as it will appear in your phone
book.
9. Press
again to confirm the change.
Result: The display shows the word Stored to confirm that the change has been made.
CHANGING YOUR TELEPHONE SETTINGS
Setting the dial mode (pulse or tone dial)
Your ThermoDECT telephone is compatible with pulse-dialling (rotary) and tone-dialling (DTMF) systems.
The default setting is DTMF mode. To set the dial mode:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
4. Press
to select Dialing mode from the options.
5. Press
.
6. Press
or to select Pulse or DTMF mode.
7. Press
to confirm your selection.
Tip: To return to standby mode, press and hold the
button.
Changing the handset ring tone
You have a choice of five ring tones for external incoming calls. To select a ring tone:
1. Press the
button.
2. Press
to select Handset Menu from the options.
3. Press
.
4. Press
to select Ext. Melody from the options.
5. Press
.
6. Press
or to select the desired handset ring tone. You will hear the melody for each tone
unless you previously disabled the ring.
7. Press
to confirm your selection.
Tip: To return to standby mode, press and hold the
button.
Changing the handset ring volume level
To change the volume level while the handset is ringing, press the or arrows.
To change the volume level while the handset is in standby mode:
1. Press the
button.
2. Press
to select Handset Menu from the options.
3. Press
.
4. Press
once to select Ring Volume.
5. Press
.
6. Press
or to select the desired handset ring volume. The ring volume level is progressively
louder from level 1 to 5.
7. (Optional) To turn off the handset ringer, select Volume Off.