Oregon Scientific ThermoDECT - Handset Clock and Alarms

24
EN
Setting the handset alarm
Your ThermoDECT handset comes with two independent alarms that you can set to ring at specified
times. To set the alarm:
1. Press the
button.
2. Press
to select Setup from the options.
3. Press
.
4. Press
to select Alarms from the options.
5. Press
.
6. Press
or to select Alarm 1 or Alarm 2.
7. Press
to confirm your selection.
8. Press
or to turn the alarm off or on.
9. Press . If you turned the alarm off in Step 8, you are returned to the Setup menu, and can
exit by pressing the
button. If you turned the alarm on, proceed to Steps 10 – 11.
10.Press the keypad digits (0 – 9) to enter the hour and minute at which you want the alarm to
sound. The alarm setting is always in 12-hour mode.
11.(Optional) Press the
or keys to switch between AM and PM.
12.Press
to confirm when you are finished. A bell-shaped symbol shows on the lower right
corner of the handset display when the alarm is set.
Deactivating the alarm
When one of the alarms activates, the handsets rings with the page tone. To stop the alarm, press any
key on the handset or the PAGE key on the base unit.
USING THE CHILD-FRIENDLY FEATURES
Your ThermoDECT telephone includes the following child-friendly features:
• Keypad lock – locks the keypad to prevent small children from inadvertently placing calls.
• Baby call – calls a pre-set number (such as to a relative or the police) whenever any key is pressed.
• Baby sit – uses a second handset as a baby monitor to listen to your child’s activities from another
room.
• Games – converts the handset into a game console for playing the car and snake games.
• Remote Sensor – monitor baby’s room temperature by placing the remote sensor in the baby’s room.
Locking and unlocking the handset keypad
You can temporarily lock the keypad to prevent small children from inadvertently placing calls. When
the keypad is locked, a small key icon
will appear in the top right corner of the handset display area.
Note: When the handset keypad is locked, YOU CANNOT MAKE ANY CALLS, EVEN
TO EMERGENCY NUMBERS.
To lock the handset keypad:
1. Press the
button.
2. Press
to select Keypad lock from the options that display.
3. Press
.
4. Press
to select Keypad lock on from the options that display.
5. Press
to confirm your selection.
To unlock the handset keypad, repeat Steps 1-5 above. In Step 4, select Keypad lock off.