Page
29
Web GUI User Guide
You can do the following operations on the System page:
①
Panel Lock: Click “ON/OFF” to lock/unlock panel buttons. “ON” indicates that
panel buttons are unavailable; “OFF” indicates panel buttons are available.
②
Beep: Turn on/off the beep.
③
LCD On Time: You can turn on/off the LCD, and set the display duration
time (Always ON/15s/30s/60s).
④
Serial Baud Rate: Click the value to set the Serial Baud Rate.
⑤
Firmware Update: Click “Browse” to select the update file, and then click
“Update” to complete firmware update.
⑥
Factory Reset: Reset the unit to factory defaults by clicking “Reset”.
⑦
Reboot: Reboot the unit by clicking “Reboot”.
Note: After reset/reboot, it will switch to the login page.
To Next Page
Loading...
