20
Wi-Fi® Internet Viewing
Status of LED Indication:
- Pair / Setup state: LED is Green and Flashing.
- Unconnected state: LED is Red and Flashing.
- Connected state: LED is Green and always on.
- Video streaming: LED is Green and Flashing.
Note:
You can only setup via a compatible smartphone or tablet and not via
a PC.
5.4 User Account and Camera Setup on Android™ Devices or
iPhone®/iPad®
What you need
• Wi-Fi® Camera Unit
• Power adapter for the Camera
• Device with Android™ system version 8.0 and above
• Or iPhone®/iPad® with iOS version 12.0 and above
5.4.1 Power ON and Connect the Camera
• Switch the parent unit off before connect the camera to Wi-Fi®.
• Connect the power adapter to mains power and insert the plug into the
power socket on the back of the Camera Unit, the unit turns on.
5.4.2 Download HubbleClub for Partners App
• Scan the QR code with your smart device
and download the HubbleClub for Partners
App from the App Store for iOS devices or
from the Google Play™ Store for Android™
devices.
• Install the HubbleClub for Partners App on
your device.
5.4.3 Sign up with Hubble on your smart device
• Ensure that your smart device is connected to your Wi-Fi® router.
• Run HubbleClub for Partners App, tap Sign Up with Hubble (fig.1),
read through the Privacy Policy, Terms and Conditions, by signing up
you agree to our terms of service, tap Done (fig.2), enter your account
information to sign up with Hubble.
To Next Page
Loading...
