Related products (sold separately)
−71−
17 Related products (sold separately)
Network converter
CC-Link compatible
NETC01-CC
MECHATROLINK-
Ⅱ
compatible
NETC01-M2
MECHATROLINK-
Ⅲ
compatible
NETC01-M3
EtherCAT compatible
NETC01-ECT
If the
BLV
Series is connected via the network converter when the
BLV
Series is used in a CC-Link system,
MECHATROLINK system, or EtherCAT system, data can be sent to the driver by converting from each communication
protocol to the RS-485 communication protocol. Alarms and other data output from the driver can also be sent to the
master station by converting from the RS-485 communication protocol to each communication protocol.
To Next Page
Loading...
