Oriental motor BXSD200-A2 - Operating Manual

HP-5123
Brushless Motor
BX
Ⅱ
Series
Driver Edition
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.
Table of contents
1 Introduction ..........................................................2
2 Safety precautions ..............................................3
3 Precautions for use .............................................5
4 Preparation ............................................................8
4.1 Checking the product .............................................. 8
4.2 How to identify the product model.................... 8
4.3 Information about nameplate .............................. 8
4.4 Products possible to combine .............................. 8
4.5 Names and functions of parts .............................. 9
5 Installation .......................................................... 10
5.1 Installation location ................................................10
5.2 Installing the driver ................................................10
5.3 Installing the external potentiometer
(sold separately) ......................................................12
5.4 Installing the regeneration resistor
(sold separately) ......................................................12
6 Connection ......................................................... 14
6.1 Connection example ..............................................14
6.2 Connecting the power supply (CN1)................15
6.3 Circuit breaker ..........................................................15
6.4 Grounding .................................................................15
6.5 Connecting the motor (CN2, CN3, CN4) .........16
6.6 Selecting a power supply for input signals ....16
6.7 Connecting the I/O signals (CN5, CN7)............16
6.8 Connecting analog external setting
devices ........................................................................17
6.9 Connecting the data setter (CN6) .....................17
6.10 Connecting the regeneration resistor
(sold separately) ......................................................18
7 Operation ............................................................ 19
7.1 Operation by input signals ..................................19
7.2 Test operation (JOG operation) ..........................21
8 Operation panel ................................................ 22
8.1 Names of parts for operation panel .................22
8.2 Main screen transitions .........................................22
9 Maintenance and inspection ....................... 23
9.1 Inspection ..................................................................23
9.2 Warranty .....................................................................23
9.3 Disposal ......................................................................23
10 Protective function .......................................... 24
10.1 Alarm list.....................................................................24
10.2 Warning list................................................................25
11 Specications ..................................................... 26
12 Regulations and standards ........................... 27
12.1 UL Standards, CSA Standards .............................27
12.2 CE Marking ................................................................27
12.3 Republic of Korea, Radio Waves Act .................27
12.4 RoHS Directive ..........................................................27