HG-8032-4
Hollow Rotary Actuators
DG Series
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
• Please read it thoroughly to ensure safe operation.
• Always keep the manual where it is readily available.
Table of contents
1
Introduction .................................. 2
2 Safety precautions ....................... 5
3 Precautions for use ...................... 8
4 Preparation..................................11
4.1 Checking the product................... 11
4.2 Combinations of actuators and
drivers.......................................... 11
4.3 Names and functions of parts...... 12
5 Installation.................................. 14
5.1 Location for installation................14
5.2 Installing the actuator .................. 15
5.3 Securing the load to the output
table.............................................16
5.4 Permissible moment load and
permissible thrust load.................17
5.5 Installing the driver ......................18
5.6 Installation of home-sensor set
(sold separately) ..........................19
5.7 Installing and wiring in compliance
with EMC Directive ......................23
6 Connection ................................. 26
6.1 Connection example....................26
6.2 Connecting to the power supply ..29
6.3 Connecting the actuator ..............30
6.4 Connecting control input/output...31
6.5 About control input/output............33
6.6 Timing chart.................................39
7 Setting ........................................ 40
7.1 Resolution....................................40
7.2 Pulse-input mode.........................41
7.3 Operating current.........................42
7.4 Speed filter...................................43
8 Protective functions .................... 44
8.1 Descriptions of protective functions
and numbers of LED blinks .........44
8.2 How to clear a protective
function ........................................45
9 Inspection ................................... 46
10 Troubleshooting and remedial
actions ........................................ 47
11 Options (sold separately)............ 50
To Next Page
General
