To Next PageTo Next Page
Need help?Do you have a question about the Oriental motor DSCD15JC and is the answer not in the manual?
General| Brand | Oriental motor |
|---|---|
| Model | DSCD15JC |
| Category | Controller |
| Language | English |
Critical safety instructions for preventing injury or death.
Details mounting to DIN rail and installation using screws with diagrams.
Details connecting AC power and capacitor to the controller's CN1 connector.
Details connecting the motor cable to the CN3 connector on the speed controller.
Explains how to ground the motor and speed controller for safety and to prevent damage.
Provides connection examples for sink and source logic with programmable controllers, detailing sink and source configurations.
Procedure to check motor and controller connection without a load.
Explains motor start/stop control using FWD/REV inputs and instantaneous stopping.
Details methods for setting rotation speed: panel, external potentiometer, or DC voltage.
Step-by-step guide for setting speed via the operation panel.
Explains setting speed via external potentiometer or DC voltage.
Adjusts time to prevent shock during speed changes, with setting range.
Enables multi-speed operation by setting speeds and using M0/M1 inputs, including data setting procedures.
Operates multiple motors at the same speed using one setting device, via variable resistor or external DC voltage.
Illustrates screen flow for operating the controller, covering monitor and data mode transitions.
Details how to lock/reset the panel and perform parameter operations to prevent data changes.
Describes setting up to 4 operation data sets for multi-speed operation.
Lists and describes parameters for configuring the controller, including speed ratios, limits, and I/O functions.
Explains the edit lock function to prevent accidental data changes.
Explains alarm functions, types, codes like Motor overheat, and their management.
Provides methods for resetting alarms via input, panel, or power cycle, including alarm record management.
