Oriental motor SCX11 User Manual

-1-
HM-60079-4
Universal Controller
SCX11
STARTUP MANUAL
Thank you for purchasing an Oriental Motor product.
The SCX11 has been designed to be easy to use, and contains several unique functions.
This startup manual should help you to get to know the product quickly. Please read the separately supplied
operating manual for more detailed information.
■ It will be necessary to connect the SCX11 to a computer for initial setup and test operation. Provide a
computer and a commercially available USB 2.0 cable (mini-B type).
■ The ESMC controller must be set to the driver mode when combining with the SCX11. The ESMC
controller is represented as "driver" in this startup manual.

Oriental motor SCX11 Specifications

General

Input Voltage	24 VDC
Control Method	Pulse Input, Serial Communication
Supply Voltage	24 VDC
Number of controllable axes	1
Motor Type	Stepper Motor
Step Angle	Not applicable
Holding Torque	Not applicable
Rated Current	Not applicable
Resistance	Not applicable
Inductance	Not applicable
Rotor Inertia	Not applicable
Communication Interface	RS-232C

Summary

Safety Precautions

List of Items

Preparation

Connection and Switch Setting

Connects the SCX11 controller to PC, power supply, and driver.

Preparation of Computer

Installs necessary USB drivers and utility software for computer setup.

Setting the User Unit

Determine Parameters

Sets application-specific units like 'mm' or 'revolution' and travel amounts.

Setting Resolution of the Driver

Configures motor resolution settings on the connected driver.

Setting Parameters of the SCX11

Uses software to configure SCX11 parameters like user unit and motor resolution.

Test Operation

Test Operation by "Motion Creator" Function of the IMC

Verifies unit settings by operating the motor via the IMC graphical interface.

Test Operation by Command Input

Confirms motor operation by sending direct commands through the terminal.

Setting the Baud Rate

Features

Features of the SCX11

Outlines the SCX11's capabilities, rich interface, and functions.

Support of Driver Functions