Two Channel Bridged Configuration
● Front and rear channels are configured for bridged two-channel operation
● Lowest recommended impedance for both front and rear channels is 4W
● Crossover and gain configurations are independently adjustable between the
front and rear channels
● Two-channel operation is recommended for this operational mode.
● Front and rear outputs can be configured for high-pass, low-pass, or full range
operation.
● Front and rear outputs can be configured for stereo (right channels will have right
output, left channels will have left output) or summed two-channel operation
(front speaker bridged, rear speaker bridged).
10
©2004 Directed Electronics, Inc.
To Next Page
Loading...
