To Next PageTo Next Page
Need help?Do you have a question about the Orion Cobalt CB3200.1D and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| RMS Power at 1 Ohm | 3200W |
| Signal to Noise Ratio | >90dB |
| Subsonic Filter | 10Hz - 50Hz |
| Low Pass Filter | 35Hz - 250Hz |
| Damping Factor | >150 |
| Fuse Rating | 300A |
| Phase Shift | 0 - 180 degrees |
| Efficiency | >85% |
| Operating Voltage | 10V - 16V |
| RMS Power at 4 Ohms | 800W |
| Input Sensitivity | 0.2V - 6V |
| Bass Boost | 0 to +18 dB |
Diagrams illustrating the controls and connections on amplifier front panels.
Detailed explanation of the amplifier's main functional features and capabilities.
Guidance on correctly connecting power, ground, and remote terminals for amplifier operation.
Instructions for fuse replacement and essential safety precautions during installation and use.
Solutions for common problems like no sound, protection mode, or poor sound quality.
Wiring configurations for specific 4-channel amplifiers in stereo mode.
Wiring configurations for the CB3400.4 amplifier in stereo mode.
Wiring configurations for specific 2-channel amplifiers in stereo mode.
Wiring configurations for the CB2700.2 amplifier in stereo mode.
Wiring configurations for specific 5-channel amplifiers in stereo mode.
Wiring configurations for specific mono 2-ohm stable amps in stereo mode.
Wiring configurations for mono 1-ohm stable amplifiers in stereo mode.
A comprehensive list of all features and functionalities offered by the amplifiers.
Diagrams showing how to connect speakers to CB600.4/CB1000.4 amplifiers.
Diagrams showing how to connect speakers to CB1500.4/CB2000.4 amplifiers.
Diagrams showing how to connect speakers to the CB3400.4 amplifier.
Diagrams showing how to connect speakers to the CB300.2 amplifier.
Diagrams showing how to connect speakers to the CB600.2 amplifier.
Diagrams showing how to connect speakers to the CB2700.2 amplifier.
Diagrams showing how to connect speakers to the CB1500.5 amplifier.
Diagrams showing how to connect speakers to the CB2700.5 amplifier.
Diagrams for connecting speakers to CB700.1M2/CB1100.1M2 amplifiers.
Diagrams for connecting speakers to CB1200.1D/CB2400.1D/CB3200.1D amplifiers.
Specific speaker connection diagram for the CB5000.1D amplifier.
Wiring configurations for CB600.4/CB1000.4 amplifiers in bridged mode.
Specific bridged wiring diagram for the CB3400.4 amplifier.
Wiring configurations for CB300.2/CB600.2 amplifiers in bridged mode.
Specific bridged wiring diagram for the CB2700.2 amplifier.
Wiring configurations for CB1500.5/CB2700.5 amplifiers in bridged mode.
Diagrams for connecting mono amplifiers in bridged mode.
Diagrams for connecting the CB5000.1D amplifier in bridged mode.
Diagrams for connecting the CB2400.1D2 amplifier in bridged mode.
Visual guide for connecting power leads to the amplifier and battery.
Essential tips for optimal power supply connection and performance.
Detailed instructions for connecting power, ground, and remote turn-on leads.
Best practices for connecting speaker and input cables to the amplifier.
Explains the function of power and protection LEDs and level controls.
Guidance on using high pass and low pass filters for sound tuning.
Techniques to prevent and reduce electrical interference in the audio system.
Technical specifications for the CB600.4 and CB1000.4 amplifiers.
Technical specifications for the CB1500.4 and CB2000.4 amplifiers.
Technical specifications for the CB3400.4 amplifier.
Technical specifications for the CB300.2 and CB600.2 amplifiers.
Technical specifications for the CB2700.2 amplifier.
Technical specifications for the CB1500.5 and CB2700.5 amplifiers.
Technical specifications for the CB700.1M2 and CB1100.1M2 amplifiers.
Technical specifications for the CB1200.1D and CB2400.1D amplifiers.
Technical specifications for the CB3200.1D and CB5000.1D amplifiers.
Technical specifications for the CB2400.1D2 amplifier.
