Orion COMBI 1415X - Page 10

10
AV1
Input Selection
If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing the AV button.
3. To connect the TV to a camcorder
To playback from a camcorder, connect the camcorder to the unit as shown.
Press the AV button to select AV2 to use the TV as a monitor.
If you wish to make a recording from the camcorder, follow the same instructions as recording a TV programme (P.19),
but select AV2 for the channel.
Front of unit
(COMBI 1415X)
2. To connect the TV to a TV Game
The unit can also be used as a display device for many video games. However, due to the wide variety of different types
of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the
suggested connection diagrams. Press the AV button to select AV2 to use the TV as a monitor. You'll need to consult each
component's Owner's Manual for additional information.
1. To connect the unit to a VCR
Press the AV button to select AV2 to use the TV as a monitor.
Camcorder
Front of unit
(COMBI 1415X)
Front of unit
(COMBI 1415X)
Audio/Video cord (not supplied)
To Audio/Video OUT
Audio/Video cord (not supplied)
To Audio/Video OUT
VIDEO IN
AUDIO IN (L)
AUDIO IN (R)
Press the TV/VCR button to select the TV mode and
then press the AV button repeatedly to select AV1 or
AV2.
AV1(Scart socket)
AV2(Front-AV-input)
TV-program
To Scart socket
of VCR
(not supplied)
VIDEO IN
AUDIO IN (L)
AUDIO IN (R)
CONNECTION TO OTHER EQUIPMENT
VIDEO IN
AUDIO IN (L)
AUDIO IN (R)
5H00701A P03-10 12/11/03, 10:15 AM10