20
PROPER CLEANING PROCEDURES
Follow these guidelines when cleaning your electric balance bike:
1. Turn o the power to the balance bike and unplug it from the charger.
2. Begin by rinsing your electric balance bike thoroughly with cool water to remove loose dirt.
3. Prepare a bucket of cool water and add a mild, neutral detergent such as dish washing
liquid or a cleaner designed for washing.
4. Use a sponge or a soft towel to clean your electric balance bike, paying special attention
to any stubborn grime. If needed, you can use a mild cleaner or degreaser to tackle
persistent dirt.
5. After cleaning, make sure to thoroughly rinse your electric balance bike with clean water
to eliminate any cleaning residues.
6. Dry your electric balance bike with a chamois or a soft towel. Avoid letting it air dry, as
this may result in dullness and water spots. While drying, inspect the bike for any chips or
scratches.
7. As a safety precaution, take a slow ride and apply the brakes multiple times. This aids in
drying the brakes and restoring normal braking performance.
High-pressure washers, like the ones available at coin-operated car washes, have the
potential to harm specic components of your electric balance bike. Please be aware that
high-pressure water or air may cause damage to particular bike components. Exercise
caution when cleaning. Avoid directly spraying all electrical components of the bike. Dry
bike o immediately.
WARNING
To Next Page
Loading...