14
7. While holding the foot peg in place, push the mounting pin into position from the top,
ensuring it passes through both sides of the mounting bracket.
8. Insert the safety cotter pin and bend it to secure it in place.
9. Verify that the foot peg folds backward under pressure and returns to the forward
position on its own.
SEAT ADJUSTMENT
1. Pull quick-release lever to loosen the clamp.
2. Raise/Lower saddle to desired height.
3. Tighten quick-release, adjust nut as needed.
HEADLIGHT INSTALLATION
1. Connect the headlight quick connect to the main wire harness.
To Next Page
Loading...