Orion e16 Xtreme 2024 - Safety Equipment

5
• Attempt to lift, push down, and twist the seat to conrm it is securely tightened.
• Inspect the connection of the foot pegs to the frame, ensuring no screw threads are visible.
The foot peg should feel rm and parallel to the ground.
• Apply the brake(s) and ensure they feel rm to the touch. Spin the wheel(s) and apply the
brakes to verify their eectiveness in stopping the wheel(s).
• Conrm that accessories (if equipped) are securely attached and won't contact any moving
parts. Ensure all reectors are in position and intact.
• Now, don your APPROVED SAFETY HELMET and relish your ride. Your safety is well worth
just a minute. Additionally, be sure to read and adhere to the warnings and instructions
outlined in this manual.
SAFETY EQUIPMENT
Orion Moto promotes the use of safety equipment during the use of your electric balance bike;
the following list is an advisory guideline of the equipment that should be obtained before
using your electric balance bike for the rst time, and to be used for every ride regardless of
experience and skill level.
HELMET: A helmet is the most important piece of protective equipment and should be worn at
all times the electric balance bike is being ridden. Ensure the helmet ts the operator snugly,
is securely fastened and provides good, all-round visibility. A poorly-tting or loose helmet can
become dislodged in an incident and then oer no protection at all.
EYE PROTECTION: Recommended to prevent eye injuries and prevent branches, bugs, dust or
sand hitting your face and distracting you. Sunglasses are unlikely to provide adequate physical
protection.
GLOVES: Protective gloves should be worn that do not prevent the rider from operating the
brake levers or controls.
FOOTWEAR: Protective footwear is recommended
CLOTHING: Arms and legs should be covered to reduce abrasions to the body, even in hot
weather. Protective long sleeves and pants should be worn when riding.