- 58 - - 59 -
ORION
Innitely Expandable
7) Key Lock Mode
• Lock the front key of DVI Converter not to turn On or Off.
8) Status
• Display the DVI Converter status (Input Source, Input Resolution, Output Resolution, Aspect
Ratio, PIP Mode, Test Pattern, Key Lock, FreeRun/Lock, Firmware Version, MSCS Version
information)
9) Picture Control
• Control the Brightness, Contrast, Sharpness, Color, and Tint of the DVI Converter.
• Brightness : The range of "Brightness" you can adjust is 0 to 100.
• Contrast : The range of "Contrast" you can adjust is 0 to 100.
• Sharpness : The range of "Sharpness" you can adjust is 0 to 28.
• Color : The range of "Color" you can adjust is 0 to 100.
• Tint : The range of "Tint" you can adjust is 0 to 90.
• Firmware Default : Initialize the adjusted values to the default values.
MLCD
To Next Page
Loading...
Need help?
General
