30
Troubleshooting
IMPORTANT
●
If one of the built-in safety devices activates, press the RESET switch, conduct the appropriate
measures as noted above, and then restart operation. (Please wait 4 minutes after the product stops
before starting the product again.)
●
Please consult with your dealer if a problem cannot be resolved by following the above mentioned
measures.
●
If the power source is cut off less than 2 seconds after the remote operation switch is turned OFF,
“E14” will be displayed. Therefore, please wait at least 2 seconds after turning OFF (shorting) the
remote operation switch before cutting off power to the product.
●
Errors that occurred previously can be reviewed. (See page 17 for details.)
●
See page 25 for information on how to clear the “
” warning.
To Next Page
Loading...
Need help?
General
