Orion TV19PL110D - Manual TV Station Presetting; Manual Tuning Procedure; Fine-Tuning and Storage

14
1
Preparation: connect analog rf-cable-supply. Select
memory-cell 2. Press key 2 (see page 15). OSD will indicate
2
in right upper corner. Eventually recently stored TV-
channel’s name might also appear.
2
Press ANALOG MENU. Press
or
to select tool-page (see here).
Press
or to select MANUAL
TUNING.
Press ENTER.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
3
COLOUR SYSTEM and SOUND
SYSTEM has already been preset
to AUTO.
Do not touch.
AUTO
SEARCH
FINE 168.30MHz
COLOUR SYSTEM
AUTO
AUTO
SOUND SYSTEM
VOX 168.30MHz
4
Press or to select SEARCH.
Press ENTER. Press
or
-key,
to start tuning. Tuning will stop
automatically at next available
station. If this does not happen to be
the ZDF, press
or
-key again to
continue tuning for the ZDF.
Then press ENTER.
SEARCH
FINE 168.30MHz
COLOUR SYSTEM
AUTO
SOUND SYSTEM
AUTO
ZDF 175.30MHz
5
If you like use fine-tuning. Select
FINE and press ENTER. Press
or
, to fine tune. See the note on
this page.
ZDF 175.30MHz
SEARCH
FINE 175.30MHz
COLOUR SYSTEM
AUTO
AUTO
SOUND SYSTEM
6
To store other stations in additional memory-cells, repeat
steps 1 to 5.
7
Press EXIT to return to the normal screen.
Manual TV station presetting
If you like, you may manually tune a certain station into a selected memory-cell, without deleting
or modifying other memory-cell’s contents. Example: Store the ZDF into memory-cell 2.
Note:
Usually fine tuning is not necessary,
due to tuning’s automatically
stopping at the very best position. If
you fine-tune anyway, proper working
of teletext-reception with built-in
tuner is no longer guaranteed.
•
32G0146B_ENG.indd 1432G0146B_ENG.indd 14 10/11/07 1:52:19 PM10/11/07 1:52:19 PM