43
EPG Timer
You can choose whether or not the screen switches on when the timer event begins - please see
page 22 (Rec screen status (LCD Power on/off)). This is so that if you are using the timer to make
a recording to your VCR or other device, the TV screen will not switch on unless you want it to.
If you try to switch to another channel while a timer event is in progress, the following message
will appear: ‘WARNING: THIS ACTION MAY CAUSE A DISTURBANCE TO YOUR RECORDING IF ONE
IS CURRENTLY IN PROGRESS - ARE YOU SURE YOU WANT TO PROCEED? YES/NO’. Select YES or
NO according to your wishes.
Notes:
A maximum of eight Timers can be
programmed.
If the EPG Timer starts when it is
already switched on, it will start at
the exact time that is set. If it starts
from the standby mode, it will begin
20 seconds in advance of the stated
time.
You cannot hasten the start time from
the original start time of the Event.
You cannot set with the same date
and time of another Event.
Press the Yellow key to change the
start time of the event.
Press the Blue key to change the
time duration of the event.
If the EPG Timer begins during
standby mode, the
(On/timer/
Standby) indicator on the unit will be
lit in orange. This is to indicate that
an EPG Timer event has begun in
standby mode.
•
•
•
•
•
•
•
1
Press GUIDE to display the Guide menu. Then press
/ / / to highlight the programme you want to set as a
timer event, then press ENTER.
Guide 16:50 Sun 20/08/2007 TV
Page - Page + Prev.Day Next Day
BBC ONE
BBC TWO
BBC THEREE
CBBC
BBC News 24
The Wild Thornberrys Bogged Down:
Nigel and Eliza are on their way to film a
rare fish. Nigel suggests a shortout
through a bog, but Ellza is reluctant. Th...
16:30-17:00 The Wild Thornberrys CBBC
7002/80/02 nuSENO CBB 100
16:30Channels
The Wild T...
Ready Steady Co...
Little Be...
No Event Name
No Event Name
No Event Na...
17:3017:00
The Blue...
The Weakest Link
No Event Name
Navigate
Enter Exit
View Info
TV/Radio
Notes:
If you select an event which has already started, the selected
program will be displayed on the screen, as you cannot set
the timer for a programme which has already started.
To display the stored timer events, press GUIDE twice.
The EPG Timer menu (see step 3 below) will appear. You
can also delete or change the frequency (Once / Daily /
Weekly) of the stored timer events (but please note that
you cannot edit the time details that have been set from
the EPG).
•
•
2
The confirmation banner will be displayed.
Press
or to select ‘YES’ or ‘NO’, then press ENTER
(the selected option is shown in blue).
3
The EPG Timer menu will appear.
Press the Red key to set the Timer mode for a selected event.
Event Timer
Navigate
Enter Exit
Service Name Mode Date Time Duration
BBC ONE Once 26/02/07 08:10 00:23
Timer mode
Delete Timer
Edit Timer Edit Duration
4
The Timer mode
specifies the
frequency of Timer
wake-up which can
be set as Once,
Daily or Weekly.
Press ENTER to
save the selected
Timer mode.
Event Timer
Service Name Mode Date
BBC ONE Once 26/02
Once
Daily
Weekly
Note:
To delete a timer event, select the specified event, then
press the Green key.
5
To return to the Guide menu, press DIGITAL MENU.
To clear the menu screen, press EXIT.
32W0146A_ENG.indd 4332W0146A_ENG.indd 43 6/12/07 12:11:21 PM6/12/07 12:11:21 PM
To Next Page
Loading...
