Osburn 1700-I Owner's Manual

Page 32
Product Specication Manual - Osburn 1700-I
ENGLISH
4.9 Removal Instructions
For inspecting purposes, the insert may need to be removed. To remove the insert, follow these
instructions:
1. Unscrew the faceplate fastener (C) holding the faceplate (B) on the insert.
2. Remove faceplate (B) by pulling on it.
3. Remove the blower assembly (A).
4. Remove the three screws securing the pipe connector (D).
5. Unscrew the bolts securing the insert to the floor on each side of the unit (E).
A
B
C
D
E

Osburn 1700-I Specifications

General

Brand	Osburn
Model	1700-I
Category	Indoor Fireplace
Language	English