Osburn 1700-I Owner's Manual

Page 22
Product Specication Manual - Osburn 1700-I
ENGLISH
4.4 Faceplate Installation
1. Remove the faceplate extension (K) secured between the firebox and the convection air jacket.
K
2. Place the faceplate panels with the finished side down on a flat, soft, non-abrasive surface.
Line up the holes of the upper faceplate panel (L) with the holes of the side panels (M) and (N).
Secure them together using four bolts (O) and nuts (P) provided.
A
DETAIL A
O
P
L
M
N

Osburn 1700-I Specifications

General

Brand	Osburn
Model	1700-I
Category	Indoor Fireplace
Language	English