OSIM OS-8212 - Preparation before use; Initial Setup and Headrest Placement

7
Preparation before use
Setting up the uDivine V2
• The uDivine V2 is packaged with its
backrest in its reclined position.
• Before use, ensure that the backrest is
raised fully to its upright position, as
shown.
Placing the headrest pad
• Insert the loose end of the headrest pad
under the strap and flip over the headrest
pad as shown.
Caution
• Do not remove the backrest pad.
Backrest
in upright
position
• Align the zipper on the headrest pad as
shown and secure it.
Backrest pad
Headrest pad
Zipper
Strap
Loose end of
the headrest pad
Zipper
Headrest pad