9
Product care and storage
Product placement and storage
Environmental factors can strongly affect the product physically and mechanically.
Do not expose the product to direct sunlight or in places with extreme heat or air-
conditioning vents. These can cause the upholstery to crack or the color to fade.
If the product is not to be used for a long period of time, cover it with a dust cover
and disconnect the power adapter from the electrical outlet.
Clean the product using a dry cloth regularly
Before cleaning, ensure that the main switch is turned off and the power adapter is
disconnected from the electrical outlet.
The upholstery of the product may be exposed to the natural body oils of users. The
main unit structure and fabric can be cleaned thoroughly with a piece of soft, dry
cloth. The common micro-fiber cleaning materials or gloves are very well suited for
this routine maintenance process. Such materials and gloves are available for sale
in most DIY shops.
Do NOT use wet elements for cleaning
The product is made up of electrical components and mechanical parts, which
are all very sensitive to moisture. Under no circumstances should they be exposed
to any form of water or moisture. If you use water (eg. a wet cloth) to clean the
upholstery, the coating may be eroded and the protection for the product will be
diminished.
As for the power button, it may result in malfunction if you use a wet cloth to clean.
Do NOT use cleaning solvents and abrasive cleaners
Under no circumstances should you use any cleaning agents, like benzene or
thinner to clean the product. This may cause the color of fabric to fade.
Do NOT attempt to repair your product
Under no circumstances should you attempt to repair the product, for safety
reason.
If you suspect a malfunction, always call the OSIM Service Center for further
assistance and information.
To Next Page
Loading...
