7
Operation
Caution
• Connect the adapter jack into the adapter jack connector.
• Connect the power adapter plug to the electrical outlet. Turn on the main
switch.
• When the product is operating while connected to power adapter, uCozy
3D Plus will not be charging.
• Do not apply more than 13 kg load on product as it may cause significant
overheating and subsequent damage to the product.
• Do not attempt to stop the kneading nodes with your hand.
• Avoid prolonged direct skin contact with the product during operation.
• Do not use the product while lying down.
• Do not apply any skincare products such as cream, lotion, gel and essence
on the skin area that comes in contact with the product. If users need to
apply skincare products on skin, please ensure there are sufficient layers of
clothing or fabric between the product and the skin area.
• Check the fabric on product for any tear or damage before usage.
• Do not use the product if fabric is torn or damaged.
• Do not remove the fabric cover to use the product.
Use with power adapter
To Next Page
Loading...
