8
Product care and storage
Product placement and storage
Environmental factors can strongly affect the product physically and mechanically. Do not expose
the product to direct sunlight or places with extreme heat or
air-conditioning vents. These can cause the product to crack or the color to fade.
If the product is not to be, use for a long period, place it inside the storage bag.
Clean the product regularly using a dry cloth
Before cleaning, ensure that the product is off and the USB cable disconnected from the power
source.
The product is customarily expose to the natural body oils of users. The main unit can be clean
thoroughly with a piece of soft, dry cloth. The common microfiber cleaning materials or gloves are
very well suited for this routine maintenance process. Such materials and gloves are available for
sale in most DIY shops.
Do NOT use wet elements for cleaning
The product is make up of electrical components and mechanical parts, which are all very sensitive
to moisture. Under no circumstances should it be expose to any form of water or moisture. If you
use water (eg. a wet cloth) to clean the product, the coating may erode and the protection for the
product will be diminish.
For the power button, it may result in malfunction if you use a wet cloth to clean.
Do NOT use cleaning solvents and abrasive cleaners
Under no circumstances should you use any cleaning agents, like benzene or thinner to clean the
product.
Do NOT attempt to repair your product
For safety reasons, under no circumstances should you attempt to repair the product.
If you suspect a malfunction, always call the OSIM Service Center for further assistance and
information.
To Next Page
Loading...
