9
Operation
• Product should be fully charged before using it for the first time.
• Connect the Type-C USB cable to electronic devices such as
laptops, USB wall power adapters or portable chargers.
• Insert the Type-C USB cable into the Type-C USB jack of the
product.
• Do not operate the product while charging or in environment
with water.
• Each full charge (approximately 3 hours) lasts up to 1.5 hours of
usage (Usage time varies based on the program selected).
• The [ ] LED indicator will emit a blinking white light and
product will beep twice while the battery is running low. After
approximate 60 seconds of blinking, the [ ] LED indicator will
be OFF.
• The [ ] LED indicator will emit a blinking red light while
charging.
• The [ ] LED indicator will emit a solid white light when the
battery is fully charged.
• Only available at 5 V as indicated on the product.
Charging the product
To Next Page
Loading...
