16
Product care and storage
Product placement and storage
Environmental factors can greatly impact the product’s physical and mechanical
condition. Do not expose the product to direct sunlight or in places with extreme
heat or air-conditioning vents.
If the product is not to be used for a long period of time, cover it with a dust
cover.
Clean the product using a dry cloth regularly
Before cleaning, ensure that the product is turned OFF and the USB cable is
disconnected from the product.
The whole unit can be cleaned thoroughly with a piece of soft, dry cloth. The
common micro-fibre cleaning materials or gloves are very well suited for this
routine maintenance process. Such materials and gloves are available for sale in
most DIY shops.
Do NOT use wet elements for cleaning
The product is made up of electrical components and mechanical parts, which
are all very sensitive to moisture. Under no circumstances should they be exposed
to any form of water or moisture.
Do not use a damp cloth to clean the control panel as this may result in
malfunction.
Do NOT use cleaning solvents
Under no circumstances should you use any cleaning agents, like benzene or
thinner to clean the product. This may cause the color of the product to fade.
Do NOT attempt to repair your product
Under no circumstances should you attempt to repair the product, for safety
reason.
If you suspect a malfunction, always call the OSIM Service Center for further
assistance and information.
To Next Page
Loading...
