11
Operation
• Press and hold the power button [ ] for 2 seconds to power ON
the product. The [ ] LED indicator will emit a solid white light.
• Press again [ ] for ‘Balance’ program and there will be one
beep.
• Press again [ ] for ‘Relax’ program and there will be two beeps.
• Press again [ ] for ‘Energize’ program and there will be three
beeps.
• Press the [ ] during the massage to cycle through the 3
programs.
• Press and hold the power button [ ] for 2 seconds to power OFF
the product. The [ ] LED indicator will be OFF.
Start/Stop the massage function
To Next Page
Loading...
