5
China SRRC - NFC Micropower Device Considerations
1) This product complies with the specific terms and usage scenarios of the
“Catalog and Technical Requirements for Micro-Power Short-Range Radio
Transmission Equipment”, the antenna type and performance used, and the
usage methods of control, adjustment, and switching.
2) It is not allowed to change the usage scene or usage conditions without
authorization, expand the transmission frequency range, increase the
transmission power (including the additional installation of radio frequency
power amplifier), and do not change the transmission antenna without
authorization.
3) It shall not cause harmful interference to other legitimate radio stations
(stations), nor shall it claim protection from harmful interference.
4) It should withstand the interference of industrial, scientific and medical (ISM)
application equipment radiating radio frequency energy or other legal radio
station (stations) interference.
5) If it causes harmful interference to other legal radio stations (stations), stop
using it immediately and take measures to eliminate the interference before
continuing to use it.
6) Military and civilian radio stations (stations) such as radio astronomy
observatories, meteorological radar stations, satellite earth stations (including
measurement and control, ranging, receiving, and navigation stations) in
aircraft and in accordance with laws and regulations, relevant national
regulations and standards. The use of micro-power equipment in
electromagnetic environment protection areas such as airports,
airports, etc. shall comply with the regulations of electromagnetic environment
protection and relevant industry authorities.
7) It is prohibited to use various model remote controllers in the area with the
center of the airport runway as the center and a radius of 5,000 meters.
(8) Environmental conditions of temperature 5-40 degrees and 5V DC voltage when
using micro-power equipment.
To Next Page
Loading...
