EasyManua.ls Logo

OSIM uJolly 2 - Safety; Usage Environment Safety; Operational Safety Precautions

OSIM uJolly 2
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
3
Caution
Usage environment
Do not use the product in an excessively
humid or dusty environment as it may
result in the product’s malfunction or an
electric shock.
Do not use the product in temperatures
higher than 40˚C.
Do not expose the product to heaters,
stoves or direct sunlight.
The product is designed for home use
and not for commercial purposes.
Do not use the product in the event of a
lightning storm.
Safety precautions
The product should be strapped securely
to the chair during operation.
Do not use the product when the fabric
of the backrest is torn and the internal
components are exposed.
Do not use the product in combination
with other therapeutic equipment or
electric blanket, etc, as this may result
in ineffectiveness or injury.
Do not cover the product during
operation. This may result in a rise in
motor temperature and subsequent
malfunction or risk of fire.
Do not insert any object or flammable
material into the product. This may
result in electric shock, malfunction or
risk of fire.
Remove power plug from the electrical
outlet immediately should liquid be
accidentally spilled onto the product as
this may result in electric shock.
Do not use the product in the event of
a malfunction or power failure. Injury
may occur when power is restored
unexpectedly.
Do not disassemble the product.
Touching the internal components of the
product may result in malfunction or an
electric shock.
Do not dismantle, drop, or subject the
product to shock or vibration.
The product must only be serviced or
repaired by OSIM Service Center. Users
must not attempt to disassemble or
repair the product.
Safety
If you use the product in a cold room,
do not increase the room temperature
abruptly. It is recommended that you
increase the temperature gradually to a
normal level.
If the product is brought into a warm
environment from a cold place where
it was stored, wait for an hour before
use as there may be water droplets on
mechanical parts due to condensation.
Using the product under such condition
may result in malfunction.

Related product manuals