9
Product care and storage
Product placement and storage
Environmental factors can strongly affect the product physically and mechanically. Do not
expose the product to direct sunlight or places with extreme heat or air-conditioning vents.
These can cause the upholstery to crack or the color to fade.
If the product is not going to be used for a long period of time, cover it with a dust cover and
disconnect the power plug from the electrical outlet.
Clean the product using a dry cloth regularly
Before cleaning, ensure that the main switch is turned off and the power plug is disconnected
from the electrical outlet.
The upholstery of the product is customarily exposed to the natural body oils of users.
The main unit structure and fabric can be cleaned thoroughly with a piece of soft, dry cloth.
The common micro-fiber cleaning materials or gloves are very well suited for this routine
maintenance process. Such materials and gloves are available for sale in most DIY shops.
Do NOT use wet elements for cleaning
The product is made up of electrical components and mechanical parts, which are very
sensitive to moisture. Under no circumstances should they be exposed to any form of water
or moisture. If you use water (eg. a wet cloth) to clean the upholstery, the coating may be
eroded and the protection for the product will be diminished.
As for the controller, it may result in malfunction if you use a wet cloth to clean.
Do NOT use cleaning solvents
Under no circumstances should you use any cleaning agents, like benzene or thinner to clean
the product. This may cause the color of the upholstery to fade.
Do NOT attempt to repair your product
Under no circumstances should you attempt to repair the product, for safety reason.
If you suspect a malfunction, always call the OSIM Service Center for further assistance and
information.
To Next Page
Loading...
