Inspection and Maintenance
CAUTION: To prevent personal injury,
•
Only qualied personnel shall perform inspections and repairs to this auxiliary box adapter.
•
Before each use, an approved inspector must inspect the auxiliary box adapter for bends, cracks,
dents, elongated holes, or missing hardware. If damage is found, discontinue use.
•
Use only those repair parts called out in the parts list in this document. Items found in the parts
list have been carefully tested and selected by OTC.
Figure 3
Support
Screw
7. Thread the upper ange nut on the support screw
to the bottom of the threads until the support screw
touches the housing. See Figure 3.
8. Install the ratchet strap to secure the auxiliary box
to the transmission jack. See Figure 2. Attach the
hooks on the end of the ratchet strap to the slots
provided in the mounting plate or other suitable
locations.
Operating Instructions contd.
Parts List & Operating Instructions
To Next Page
Loading...
