46
OTICON ACTO FITTING GUIDE
47
Structure in Genie
The Organizer – Horizontal Navigation
Main programming steps
1. Client: Appears only when running Genie outside NOAH.
2. Counselling: Appears only if Gateway has been installed.
3. Family: Selection of all hearing instrument families.
4. Selection: Select instrument styles and features
(incl. Streamer).
5. Fitting: Verifying and fine tuning of settings.
6. End Fitting: Verify and set user operated buttons
and link Streamer(s).
Task Pane – Vertical Navigation
In each organizer step there is a Task Pane that gives access to
tools and links related to where you are in the fitting process.
Programming Oticon Acto
1
2 3 4 5 6
Family Step
Click ‘Detect’ to detect connected instruments. Genie will
display what has been detected. Click Continue to go to the
selection screen.
Note: You can simulate a fitting by selecting ‘Oticon Acto’ from
the Family circle. Select Oticon Acto or Oticon Acto Pro from
the second level screen that opens.
7
To Next Page
Loading...
