22
OTICON INTIGA FITTING GUIDE 23
These custom moulds are produced from a traditional,
deep impression and are a good choice in cases with
retention problems.
Custom RITE Moulds can be ordered in the following styles:
Canal, Canal with lock, Skeleton or Half shell.
RITE Intiga Micro Moulds for the Standard Receiver
The Intiga Micro Mould is an acrylic custom solution that
can be used instead of a dome for a RITE fitting.
Intiga Micro Moulds and RITE Moulds are produced from a
traditional, deep impression. The Adapter clearly
indicates Right (red)/Left (blue) colour marking.
Alternative Custom Moulds for Standard Receivers
Canal
Half ShellSkeleton
Canal Lock
Adapter
WaxStop
Up Indicator
To Next Page
Loading...
